CALL - 9961 740 295

Water Treatment Plant

Pressure Sand Filter:
It is recommended to remove suspended solids & undissolved impurities .

Pressure Sand Filter is an ideal solution for the systems with high sediment, silt, sand, and turbidity. Our Sand filters are well established in media filtration technology. The sand filters are specially designed to take care of the range of suspended impurities. Our unique design ensures the maximum utilization of the surface area, lesser pressure drop across the pressure bed and effective elimination of the impurities. The strength, stability and micro-porous character of filtration media make our sand filter suitable for virtually every application in the water treatment industry.

Activated Carbon Filter:
It is used for water & Waste Water purification for different applications like BOD, removal of color, smell, odour and turbidity. Activated carbon (AC) is a natural material derived from bituminous coal, lignite, wood, coconut shell and is activated by steam & other means.

Iron Removal Filter:
The presence of iron is probably the most common water problem faced by consumers and water treatment professionals. The secondary (aesthetic) maximum contaminant levels (MCL) for iron and manganese are 0.3 milligrams per liter (mg/l) and 0.05 mg/l, respectively. Iron and manganese in excess of the suggested maximum contaminant levels (MCL) usually results in discolored water, laundry, and plumbing fixtures.To minimise the iron contamination, we use Iron removal filter.

Water softening method is by iron exchange process. Softening plant is used to soften the water, by removing the minerals that cause the water to be hard. Minerals like calcium and magnesium present in the water in their carbonates and bi-carbonates form makes the water hard which creates many problems when it is used in industrial as well as in other domestic purposes.

Water Treatment Plant Kerala

DM Plant

Demineralization or Deionisation is the process of removing mineral salts from water by using the ion exchange process. With most natural water sources it is possible to use Demineralisation and produce water of a higher quality than conventional distillation. They are available in different sizes and materials, manually operated or fully Automatic, & ready to install & are available as standard models or custom built versions for specific needs. 

Operating Principle 
A Typical two-bed DM Plant consists of two FRP/MS Rubber lined Pressure vessels connected in series along with its internal fittings. The first unit consists of high capacity strongly acidic cation exchange resin, which converts positive ions of salt and replaces them with hydrogen ions to form respective acids, which are absorbed in next vessel by strongly basic anion exchange resin. The water obtained by this process shows conductivity less than 20 µ S / cm at 25o C and total dissolved solids less than 10 ppm.

Further high purity water can be achieved by Mixed Bed Deionisers, which are designed to produce high purity treated water. They can be used as polishing units after two bed DM Plant to obtain high purity water. Mixed Bed Deionisers are single column units, filled with strongly acidic cation and strongly basic anion exchange resins mixed together.

DM Plant Kerala

Reverse Osmosis Plant Industrial

We provide Reverse Osmosis Plants which are based on the reverse osmosis process to clean impure water. Reverse osmosis is the process of forcing a solvent from a region of high solute concentration through a membrane to a region of low solute concentration by applying a pressure in excess of the osmotic pressure. As Reverse Osmosis does not occur naturally, it must be created by applying pressure to the high solids water in order to force it through the membrane, with pressures from 8 - 14 bar for fresh and brackish water, and 40 - 70 bar for seawater, which has around 24 bar (350 psi) natural osmotic pressure which must be overcome. The membranes used for reverse osmosis have a dense polymer barrier layer in which separation takes place.

RO Plant Kerala

RO Domestic Application

We have a wide range of domestic RO systems, capacity of 10 ltrs/hr to 100 ltrs/hr

RO Domestic Application

UV Water Treatment

Ultra-violet (UV) treatment is the disinfection process of passing water by a special light source. Immersed in the water in a protective transparent sleeve, the special light source emits UV waves that can inactivate harmful microorganisms. This method of treatment is growing in popularity because it does not necessarily require the addition of chemicals.

UV systems alone are neither intended to treat water that is visually contaminated nor intended to convert wastewater to safe, microbiologically potable water.
How does UV treatment work?

The ultra-violet rays, similar to the sun's UV but stronger, alter the nucleic acid (DNA) of viruses, bacteria, molds or parasites, so that they cannot reproduce and are considered inactivated.

Ozone Water Treatment

Ozone is a colorless gas that has an odor similar to smell of the air after a major thunderstorm.
It has a greater disinfection effectiveness against bacteria and viruses compared to chlorination. In addition, the oxidizing properties can also reduce the concentration of iron, manganese, sulfur and reduce or eliminate taste and odor problems. Ozone oxides the iron, manganese, and sulfur in the water to form insoluble metal oxides or elemental sulfur. These insoluble particles are then removed by post-filtration. Organic particles and chemicals will be eliminated through either coagulation or chemical oxidation. Ozone is unstable, and it will degrade over a time frame ranging from a few seconds to 30 minutes. The rate of degradation is a function of water chemistry, pH and water temperature.

Ozone Treatment Kerala

Sewage Treatment Plant

Sewage treatment is the process that removes the majority of the contaminants from waste-water or sewage and produces both a liquid effluent suitable for disposal to the natural environment and a sludge. To be effective, sewage must be conveyed to a treatment plant by appropriate pipes and infrastructure and the process itself must be subject to regulation and controls.

Other wastewaters require often different and sometimes specialised treatment methods. At the simplest level treatment of sewage and most wastewaters is through separation of solids from liquids, usually by settlement. By progressively converting dissolved material into solid , usually a biological floc and settling this out, an effluent stream of increasing purity is produced.

Mechanical treatment 
Influx (Influent) 
Removal of large objects 
Removal of sand 

Biological treatment
Oxidation bed (oxidizing bed) or Aerated systems 
Post precipitation 

Chemical treatment
(this step is usually combined with settling and other processes to remove solids, such as filtration. The combination is referred as physical-chemical treatment. It is rarely used along with biological treatment.).

Sewage Treatment Plant

Rain Water Filters

INNOVATIVE: (ROOFTOP RAINWATER HARVESTING FILTERS) 'RAINY' Filters first of its kind in the country designed to fix to the WALL by connecting Rooftop drain water pipes. When the rainwater flows by gravity and enter the filter at specific velocity, which creates COHESIVE FORCE and segregates dirt particles and clean water individually, thereby dirt particles and waste material are flushed out through the DRAIN OUTLET, while the clean rain water passes through CLEAN WATER OUTLET, which can be used for re-utilization or recharging of bore wells.

In Conventional Filter the rainwater along with dirt particles, tree leaves and other particles have to pass through the Filter candle or through the other filtration media like mesh, sponge, or sand. In this case the debris will be clogged inside the filter and decay. Due to this the rainwater may contaminate and also the chances of overflow of water through the filter/ rooftop and causes hazard ness.

FL-150-The Filter is designed to take the load up t0 150 square meters of Roof area at intensity of rainfall 50 mm/hour.there is no requirement of electric power to operate the Filter.just by Gravity pressure filter function well.Suitable for Individual houses.Flats and small Commmercial Buildings.
Take Photos & Tech. details

FL-250-The Filter is designed to take the load up to 250 square meters of Roof area at intensity of rainfall 50 mm/hour. There is no requirement of electric power to operate the Filter. Just by Gravity pressure filter functions well. Suitable for Individual houses, Flats, Commercial Buildings and Industrial Use.

Rain Water Filters

Annual Maintenance Contract

We offer a comprehensive range of services on plants and machines. Our excellent services ensure our plants and machines remain effective and easily operable. Our wide assortment of services comprises of the following:

As per operation and maintenance contracts, we undertake complete responsibility of the plant to provide treated water of the designed quality and quantity. Our proficient workforce offers clients services with requisite spares and consumables for hassle free operation of the plant.

Our annual maintenance contract takes care of preventive maintenance. Backed by this we ensure longevity of Components, trouble-free operations and lower downtime. Our annual maintenance contract services comprises of scheduled inspection & scheduled maintenance of the Plant.

We also offer our excellent services in upgrading or revamping the existing water treatment plants for enhancing the capacity or quality of the plant as required by our clients. Our team of professionals manages the upgradation or revamping of the water treatment plants.

Water Treatment Kerala

  • Inverters
  • Solar Inverters
  • Water Purifiers
  • Hi-Power Batteries
  • Solar Water Heaters